Qlogic SANbox2-16 Fibre Channel Installation Manual page 114

B – Command Line Interface
Set Config Command
ALFairness
ARB_FF
InteropCredit
ExtCredit
FANEnable
LCFEnable
MFSEnable
MFS_TOV
MSEnable
NoClose
I/O Stream Guard
VIEnable
CheckAlps
B-26
Table B-7. Set Config Port Parameters (Continued)
Parameter Description
Arbitration loop fairness. Enables (True)
or disables (False) the switch's priority
to arbitrate on the loop.
Use ARB_FF instead of idles on loop
FCAL option
Interoperability credit. The number of
buffer-to-buffer credits per port. 0
means the default (12) is unchanged.
Extended credits. The number of port
buffer credits that this port can acquire
from donor ports.
Fabric address notification. Enables
(True) or disables (False) the
communication of the FL_Port address,
port name, and node name to the
logged-in NL_Port.
Link control frame preference, R_CTL =
0xC
Multi-Frame Sequence bundling
MFS limit for camp on
Management Server enable on this port
Don't close unless another device
arbitrates
Enables or disables the suppression of
RSCN messages
Enable VI preference routing
Close before sending frames to new
target

59021-05 A