Stp Monitor; Reports - Extreme Networks EPICenter Guide Manual

Problem: The Sync Links command removed legitimate links that were down.
The EPICenter server cannot discover a link if the link is down. Therefore, when it rediscovers links it will
only discover up links (or partially up links in the case of composite links). However, down links will
automatically reappear when they come up again. You can also use the Sync Links command again after
the down links have come back up.

STP Monitor

Problem: There are multiple STP nodes with the same name.
The EPICenter server identifies an STP domain by its name and tag. If you see multiple STP domains in
EPICenter, you may have a misconfiguration where the same STP domains are configured with different
tags on different switches.

Reports

Problem: After viewing reports, added a user-defined report, but it doesn't appear in the list of
reports on the main reports page.
The Reports page updates the list of reports when the page is loaded. To update the list, Refresh the page.
Problem: Reports cannot be launched.
Due to a problem with Windows, sometimes reports cannot be launched from the EPICenter client. To
work around this problem, you can either set your browser home page to blank, or you can run the
Reports feature directly from the browser:
1 Point the browser to the URL of the EPICenter server:
http://<host>:<port>/
In the URL, replace
Replace
<port>
installation.
2 Click the View Reports link.
3 Login to the Reports feature.
EPICenter Concepts and Solutions Guide
with the name of the system where the EPICenter server is running.
<host>
with the TCP port number that you assigned to the EPICenter Web Server during
STP Monitor
177