Extreme Networks EPICenter Guide Manual page 200

EPICenter Utilities
Table 12: VlanMgr command options (continued)
Option
-port <ports>
-tagport <ports>
-ipf
-ip <IP address>/<subnet
mask>
-tag <number>
-protocol <protocol name>
Delete VLAN:
-delete <VLAN name>
• You can specify only one EPICenter server (database) in a command. If you want to create, modify or
delete VLANs for devices managed by multiple EPICenter servers, you must use a separate command
for each server.
• To create a VLAN on multiple switches, use multiple
• The option effectively recreates a VLAN with only the options specified in the command. Any
-modify
options not specified are reset to their defaults, and only devices specified with a
modify command will be included in the VLAN.
WARNING!
Only the devices that are explicitly included in a VlanMgr modify command will be included in the
modified VLAN. Any devices in the original VLAN that are not specified in the modify command will
be removed from the VLAN as a result of the modify command. Any options that are not explicitly
specified will be reset to their defaults.
For example, suppose you have untagged VLAN Test1 that includes ports 2, 3,and 4 on device
10.20.30.40. To add ports 1 and 2 on device 10.20.30.50 to the VLAN, you can use the
command, but the command must specify both
10.20.30.40 -port 2,3,4
its ports will be removed from the VLAN.
200
Value
Ports to be included in the VLAN as untagged
ports on the device specified by the preceding
-dip option. If this option is not included, any
untagged ports configured on this device will be
removed from the VLAN.
Ports to be included in the VLAN as tagged ports
on the device specified by the preceding -dip
option. If this option is not included, any tagged
ports configured on this device will be removed
from the VLAN.
Enable IP forwarding for this VLAN on the
specified device. If this option is not included, IP
forwarding will be disabled on this device.
Set an IP address and submask for this VLAN on
the specified device. Format is xx.xx.xx.xx/nn. If
this option is not included, the VLAN will be
reconfigured without a VLAN IP address.
Set a tag value for the VLAN. This can be a value between 2 and 4095.
If this option is not included, the VLAN will be reset to an untagged
VLAN.
Set protocol filter. If this option is not included, the protocol will be reset
to ANY.
Delete the specified VLAN from all switches on which it is configured.
-dip 10.20.30.50 -port 1,2
. If you do not include device 10.20.30.40 in the command, that device and
These options
must immediately
follow the -dip
option to which
they apply.
Each option may
be specified once
per -dip option.
options in a single command.
-dip
Default
No
untagged
ports
No tagged
ports
IP
forwarding
disabled
No IP
address
Untagged
ANY
None
option in the
-dip
-modify
and
-dip
EPICenter Concepts and Solutions Guide