Extreme Networks EPICenter Guide Manual page 47

1 Click the Alarm Definition tab at the top of the window. This displays the Alarm Definition List.
Figure 14: The Alarm Definition List with the Overheat alarm selected
2 Scroll down in the list and select the Overheat alarm definition. The basic properties for this alarm
definition are displayed in the lower part of the page when you do this, as shown in Figure 14.
3 Click the Modify button. A Modify Alarm Definition dialog appears, with the Basic properties tab
displayed.
4 Click the Action tab to display the alarm actions available.
EPICenter Concepts and Solutions Guide
Using the EPICenter Alarm System
47