Epicenter Policy Limitations - Extreme Networks EPICenter Guide Manual

Policy Manager Overview
• Changes made through the ExtremeWare CLI or ExtremeWare Vista on a device managed by the
EPICenter server
• A user login or end station reboot when DLCS is enabled
• Saving a change to a policy within the Policy Manager
If Auto Configuration is disabled, you must explicitly perform the configuration process using one of
the directed configuration functions initiated using the Configure or Configure All buttons on the
Policy Manager toolbar.
The EPICenter policy server also supports policy enabling and disabling, and policy configuration
through an external access protocol and API. External applications can use Tcl functions to enable and
disable policies, and to configure policies on specified devices. The external access protocol and Client
Tcl API are documented in Appendix E of this manual.

EPICenter Policy Limitations

The EPICenter Policy Manager does not support the entire set of policy-based QoS features found in the
most current versions of the ExtremeWare software. In addition, not all versions of the ExtremeWare
software support all the features available through the Policy Manager.
162 EPICenter Concepts and Solutions Guide