Extreme Networks EPICenter Guide Manual page 199

Table 12 specifies the options you can use with this command:
Table 12: VlanMgr command options
Option
-user <username>
-password <password>
-host <hostname | IP
address>
-port <port>
-help
Create a new VLAN:
-create <VLAN name>
-dip <IP address>
-port <ports>
-tagport <ports>
-ipf
-ip <IP address>/<subnet
mask>
-tag <number>
-protocol <protocol name>
Modify VLAN configuration:
-modify <VLAN name>
-dip <IP address>
EPICenter Concepts and Solutions Guide
Value
EPICenter user name. This option is required.
EPICenter user password. If the password is blank, do not include this
argument.
EPICenter server hostname or IP address
EPICenter server port number
Displays syntax for this command
Create a new VLAN of the specified name.
IP address of device to add to VLAN. This option may be repeated.
Ports to be added to VLAN as untagged ports on
the device specified by the preceding -dip
option.
Ports to be added to the VLAN as tagged ports
on the device specified by the preceding -dip
option.
Enable IP forwarding for this VLAN on the
specified device.
Set an IP address and submask for this VLAN on
the specified device. Format is xx.xx.xx.xx/nn
Set a tag value for the VLAN.
Set protocol filter.
Reset the configuration of the specified VLAN to the options specified
in this command.
IP address of device to be included in the VLAN. This option may be
repeated.
The VlanMgr Utility
Default
None
No
password
localhost
80
None
None
None
These options No
must immediately untagged
follow the -dip ports
option to which
No tagged
they apply.
ports
Each option may
be specified once
per -dip option.
IP
forwarding
disabled
No ip
address
Untagged
ANY
None
None
199