Software Signatures; Rebooting The Switch; Saving Configuration Changes - Extreme Networks ExtremeWare 7.2e Installation And User Manual

Table 45: Sample show output
Release Type
Beta
Development
Branch

Software Signatures

Each ExtremeWare image contains a unique signature. The BootROM checks for signature compatibility
and denies an incompatible software upgrade. In addition, the software checks both the installed
BootROM and software and also denies an incompatible upgrade.

Rebooting the Switch

To reboot the switch, use the following command:
reboot {time <date> <time> | cancel}
where is the date and
date
rebooted. The values use the following format:
mm/dd/yyyy hh:mm:ss
If you do not specify a reboot time, the reboot occurs immediately following the command, and any
previously schedule reboots are cancelled. To cancel a previously scheduled reboot, use the
option.

Saving Configuration Changes

The configuration is the customized set of parameters that you have selected to run on the switch. As
you make configuration changes, the new settings are stored in run-time memory. Settings that are
stored in run-time memory are not retained by the switch when the switch is rebooted. To retain the
settings, and have them load when you reboot the switch, you must save the configuration to
nonvolatile storage.
The switch can store two different configurations: a primary and a secondary. When you save
configuration changes, you can select to which configuration you want the changes saved. If you do not
specify, the changes are saved to the configuration area currently in use.
To save the configuration, use the following command:
save configuration {primary | secondary}
To use the configuration, use the following command:
use configuration [primary | secondary]
The configuration takes effect on the next reboot.
ExtremeWare 7.2e Installation and User Guide
Show Version Command
Version 7.0.1 (Build 3) beta1.triumph-r4
Version 7.0.0 (Build 67) branch.triumph-r5
is the time (using a 24-hour clock format) when the switch will be
time
Saving Configuration Changes
Show Switch Command
7.0.1b3 beta1.triumph-r4
7.0.0b67 branch.triumph-r5
cancel
319