Extreme Networks ExtremeWare 7.2e Installation And User Manual page 283

Configuring the Summit 400 using ExtremeWare Vista
Figure 75: VLAN Administration (1 of 2)
Configuring a VLAN
The second section of the VLAN window allows you to change VLAN parameters. Use the pull-down
menu to choose an existing VLAN name and click Get to populate the remaining fields. Figure 76
shows an example of the Configure VLAN Information.
Use the following fields to make changes to a VLAN:
IP Address—Either changes the IP address or unconfigures the IP address. The Unconfigure button
resets the IP address of the VLAN; the Configure button allows you to assign a different IP address to
the VLAN.
Netmask—Specifies a subnet mask in dotted-quad notation (e.g. 255.255.255.0).
802.1Q Tag—Adds an 802.1Q tag to the VLAN. Acceptable values range from 1 to 4094.
Spanning Tree Domain—Assigns the VLAN to a STPD.
QoS Profile—Assigns a QoS profile to the VLAN.
ExtremeWare 7.2e Installation and User Guide 283