Configuration For Abr1 - Extreme Networks ExtremeWare 7.2e Installation And User Manual

Figure 50: IP multicast routing using PIM-SM configuration example
Area 0
Headquarters
ABR 2
Chicago
160.26.25.2
Area 5

Configuration for ABR1

The router labeled ABR1 has the following configuration:
configure vlan HQ_10_0_2 ipaddress 10.0.2.1 255.255.255.0
configure vlan HQ_10_0_3 ipaddress 10.0.3.1 255.255.255.0
configure vlan LA_161_48_2 ipaddress 161.48.2.2 255.255.255.0
configure vlan CHI_160_26_26 ipaddress 160.26.26.1 255.255.255.0
configure ospf add vlan all
enable ipforwarding
enable ipmcforwarding
configure pim add vlan all sparse
create access-profile rp-list ipaddress
configure rp-list add ipaddress 224.0.0.0 240.0.0.0
enable loopback HQ_10_0_3
configure pim crp HQ_10_0_3 rp-list 30
configure pim cbsr HQ_10_0_3 30
configure pim spt-threshold 16 8
ExtremeWare 7.2e Installation and User Guide
IR 2
10.0.1.1
10.0.3.2
10.0.3.1
160.26.26.1
160.26.25.1
Virtual link
160.26.26.2
Chi_160_26_24
10.0.1.2
HQ_10_0_1
10.0.2.2
ABR 1
10.0.2.1
Rendezvous
point
161.48.2.2
161.48.2.1
Area 6 (stub)
Configuring IP Multicasting Routing
IR 1
Los Angeles
EW_018
255