Extreme Networks ExtremeWare 7.2e Installation And User Manual page 192

Ethernet Automatic Protection Switching
Table 34: show eaps Display Fields (Continued)
Field
State:
[Running: ...]
Enabled:
Mode:
Primary/Secondary port:
Port status:
Tag status:
Hello Timer interval:
192
Description
On a transit node, the command displays one of the following states:
• Idle—The EAPS domain has been enabled, but the configuration is
not complete.
• Links-Up—This EAPS domain is running, and both its ports are up
and in the FORWARDING state.
• Links-Down—This EAPS domain is running, but one or both of its
ports are down.
• Preforwarding—This EAPS domain is running, and both of its ports
are up, but one of them is in a temporary BLOCKED state.
On a master node, the command displays one of the following states:
• Idle—The EAPS domain has been enabled, but the configuration is
not complete.
• Init—The EAPS domain has started but has not yet determined the
status of the ring. The secondary port is in a BLOCKED state.
• Complete—The ring is in the COMPLETE state for this EAPS
domain.
• Failed—There is a break in the ring for this EAPS domain.
• [Failtimer Expired]—When the failtimer expires and it's action is set
to send-alert, this flag is set. This flag indicates there is a
misconfiguration or hardware problem in the EAPS ring. The EAPS
master node will continue to remain in COMPLETE or INIT state
with it's secondary port blocking.
• Yes—This EAPS domain is running.
• No—This EAPS domain is not running.
Indicates whether EAPS is enabled on this domain.
• Y—EAPS is enabled on this domain.
• N—EAPS is not enabled.
The configured EAPS mode for this switch: transit (T) or master (M).
The port numbers assigned as the EAPS primary and secondary ports.
On the master node, the port distinction indicates which port is blocked
to avoid a loop.
• Unknown—This EAPS domain is not running, so the port status has
not yet been determined.
• Up—The port is up and is forwarding data.
• Down—The port is down.
• Blocked—The port is up, but data is blocked from being forwarded.
Tagged status of the control VLAN:
• Tagged—The control VLAN has this port assigned to it, and the port
is tagged in the VLAN.
• Untagged—The control VLAN has this port assigned to it, but the
port is untagged in the control VLAN.
• Undetermined—Either a VLAN has not been added as the control
VLAN to this EAPS domain or this port has not been added to the
control VLAN.
The configured value of the timer in seconds, specifying the time that
the master node waits between transmissions of health-check packets.
ExtremeWare 7.2e Installation and User Guide