Extreme Networks ExtremeWare 7.2e Installation And User Manual page 271

Configuring the Summit 400 using ExtremeWare Vista
QoS Profile—A QoS profile in the format of QPn, where n is from 1 to 8
Figure 63: Port Configuration Window
Below the Port Configuration table is the box for configuring port parameters. When configuring ports,
you must select appropriate values for all parameters before submitting the change. The selectable fields
are:
Port Number—Port numbers 1 to 48, or from 1 to 50 if you have the optional XEN card installed.
State—The port state, either enabled or disabled
Restart—Select yes to restart the port
Autonegotiation—The autonegotiation of the port speed and the duplex setting, either enabled or
disabled
Speed—The setting for port speed, either 10, 100, or 1000
Duplex—The autonegotiation setting for the duplex setting, either half or full
QoS Profile—A QoS profile in the format of QPn, where n is from 1 to 8
ExtremeWare 7.2e Installation and User Guide 271