Software - Extreme Networks ExtremeWare 7.2e Installation And User Manual

Summit 400-48t Switch Overview and Installation
The fiber ports share PHY with the first four copper port.
• 1 copper management port 10/100/1000BASE-T
• 1 console port, serial
• 2 (optional) modular 10 Gigabit uplink ports
• 2 stacking ports (10 Gigabit) reserved for future software features
• Supports redundant power support using the optional EPS 160 External Power Supply
• Redundant uplink support

Software

The software features of the Summit 400-48t include:
• Virtual local area networks (VLANs) including support for IEEE 802.1Q and IEEE 802.1p
• VLAN aggregation
• Spanning Tree Protocol (STP) (IEEE 802.1D)
• Quality of Service (QoS) including support for IEEE 802.1P, MAC QoS, and eight hardware queues
• Policy-Based Quality of Service (PB-QoS)
• Wire-speed Internet Protocol (IP) routing
• Extreme Standby Router Protocol (ESRP) - Aware support
• Ethernet Automated Protection Switching (EAPS) support
• Jumbo frame support
• DHCP/BOOTP Relay
• Routing Information Protocol (RIP) version 1 and RIP version 2
• Open Shortest Path First (OSPF) routing protocol
• Wire-speed IP multicast routing support
• Diffserv support
• Access-policy support for routing protocols
• Access list support for packet filtering
• Access list support for rate-limiting
• IGMP snooping to control IP multicast traffic
• Protocol Independent Multicast-Sparse Mode (PIM-SM)
• Load sharing on multiple ports
• RADIUS client and per-command authentication support
• TACACS+ support
• Console command line interface (CLI) connection
• Telnet CLI connection
• SSH2 connection
• ExtremeWare Vista Web-based management interface
• Simple Network Management Protocol (SNMP) support
• Remote Monitoring (RMON)
20 ExtremeWare 7.2e Installation and User Guide