EUROCOM Notebook User Manual page 129

Problem
The Wireless LAN/
Bluetooth modules
cannot be detected.
The PC Camera module
cannot be detected.
The Wireless LAN/
Bluetooth/ PC Camera
modules cannot be
configured.
No visual indicators
appear when using the
Function Key
combinations, or the
audio record function
does not work.
The modules are off. Check the LED indicator
WLAN/Bluetooth module is on or off (see
off, then press the Fn + F11 (WLAN) or Fn + F12 (Bluetooth) key combination(s) in order to
enable the modules (see "Function Keys" on page 1 -
The module is off. Press the Fn + F10 key combination in order to enable the module (see
"Function Keys" on page 1 -
the camera picture.
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions for the appropriate module in
Options" on page 7 - 1/"Driver Installation" on page D -
The hot key driver is not running/installed (the icon will not appear in the taskbar). Make sure you
have installed the driver. If you do not see the icon in the taskbar
again from C:\Program Files\HotKey_Driver\HotKeyDriver.exe.
Possible Cause - Solution
and/or function key indicator to see if the
"LED Indicators" on page 1 -
11).
11). Run the BisonCap program (see
30).
Problems and Possible Solutions 8 - 11
Troubleshooting
8). If the LED indicator is
"" on page 7 - 8) to view
"Modules &
/ you can run the program
8