Charging The Battery Pack Abroad - Sony DCR-SX45 Operating Manual

To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the batter}, pack:' Even if"the batter}, pack is
attached, the battery pack is not discharged.
Notes on the battery pack
• When you remove the battery pack or disconnect the A(" Adaptor, close the LCD screen and make sure
that the [IZll(Movie)/€'! (Photo) lamps (p. 17), the access lamp (p. 21) are turned off_
• The CHG (charge) lamp flashes during charging under the lbllowing conditions:
- The battery pack is not attached correctl?c
- The battery pack is damaged.
- The temperature of the battery pack is low.
Remove the battery pack from },our camcorder and put it in a warm place.
- The temperature of the battery pack is high.
Remove the battery pack from },our camcorder and put it in a cool place.
• In the defhult setting, the power turns offautomatically if you leave your camcorder without any
operation lbr about 5 minutes, to save battery power ([A.SHUT OFF]).
Notes on the AC Adaptor
• Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the A(" Adaptor from
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
• Do not short circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a maliunction.
1;