Charging The Battery Pack Abroad - Sony Handycam DCR-SR47 Operating Manual

us
14
- When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever
CD
and remove the battery pack
@.
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the battery pack."
Notes on the battery pack and the AC Adaptor
- When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure
that the
ItI
(Movie) lamp/O (Photo) lamp (p. 15)/ACCESS/access lamp (p. 13,39) are turned off.
- Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
- In the default setting, the power turns off automatically if you leave your camcorder without any
operation for about 5 minutes, to save battery power ([A.SHUT
OFF]).
Charging the
battery pack
abroad··
You can charge the battery pack in any countrieslregions using the AC Adaptor supplied with
your camcorder within the.AC 100 V - 240'\\ 50 Hz/60 Hz range.
-Do not use an electronic voltage transformer.