Sony DCR-SX45 Operating Manual page 42

@Turn o n your camcorder, and c onnect
the DVD writer tothe _'(USB) jack o f
your camcorder with the USB c able of
the DVD writer.
• _ucan p layback movies on the T V
screen by connecting the c amcorder toa
TV (p. 29).
@Insert acreated disc into the DVD
writer.
The m ovies onthe disc appear as
VISUAL INDEX onthe camcorder
screen.
@Press the play b utton onthe DVD writer.
• _ucan a lso operate by the c amcorder
screen.
@Touch [END] ---+ [ EJECT DISC] on the
camcorder screen and r emow, the disc
after the operation iscompleted.
@Touch _ and d isconnect the U SB
cable,
Notes
• Do not do any of the fbllowing when creating
a disc.
- Turn off the camcorder
- Disconnect the USB cable or the AC adaptor
- Subject the camcorder to mechanical shock
or vibration
- Eject the memory card fl'om the camcorder
• Play the created disc to make sure dubbing was
perIbrmed correctly befbre deleting the movies
on your calncorder.
• If [Failed.] or [DISC BURN fhiled.] appears on
the screen, insert another disc into the DVD
writer and perfbrm the DISC BURN operation
again.
_Tips
• If the total memory size of movies to be burnt
by the DISC BURN operation exceeds that of
the disc, disc creation stops when the limit is
reached. The last movie on the disc may be
cut oft_
• Disc creation time to dub movies to the limit
of the disc is about 20 minutes to 60 minutes.
It may take more time depending on the
recording mode or the number of scenes.
• If you cannot play back created discs on any
DVD player, connect the camcorder to the
DVD writer, and then play back.
You can saw' movies on a disc by
connecting your camcorder to disc creation
devices, such as a Sony DVD writer other
than DVDirect Express, with the USB
cable. Refk, r also to the instruction manuals
supplied with the devices to be connected.
(_ Notes
• Sony DVD writer may not be available in some
countries/regions.
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor Ibr this
operation (p. 16).
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder
and the wall outlet (wall socket)
(p. 16).