Step 1: Charging The Battery Pack - Sony DCR-SX45 Operating Manual

Step 1" Charging the battery pack
CHG (charge) lamp
Battery pack
DC IN jack Power cord
(Mains lead)
DC plug
iiiiiiiiiiii1_
To the wall outlet
AC r,ua_or
(',','all socket)
You can charge the "h_fbLITHIUM" battery pack (V series) after attaching it to your
camcorder,
Notes
• 5_u cannot attach any "InIbLITHIUM" battery pack other than the V series to your camcorder.
Turn offyour camcorder by closing the LCDscreen.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Align the • mark on the DC
plug
with thaton the DC IN jack.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
When the battery is charged, disconnect the ACAdaptor from the DCIN
jack of your camcorder.