Sony DCR-SX45 Operating Manual page 44

Start playback on your
camcorder, and record it on the
recording device.
• Rel?r to the instruction manuals supplied
with your recording device fbr details.
A/V Remote Connector
Input
S VIDEO
t°°
VIDEO
N]- ®_
(Ydlow)
(White)
_> V®<
AUI)IO
(Red)
('i\,llow)
,::::.:_:: , Signal flow
Insert the recording media in the
recording device.
• If your recording device has an input
selector,set it to the input mode.
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable [] (supplied) or an A/V
connecting cable with SVlDEO
[] (sold separately).
• Connect your camcorder to the input jacks
of the recording device.
When dubbing is finished, stop
the recording device, and then
your camcorder.
Notes
• Since dubbing is perfbrmed via analog data
transf_.'r, the image quality may deteriorate.
• To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, touch _ (MENU) _ [Show
others] _ ]OUTPUT SETTINGS] (under
[GENERAL SET] category) _ [DISP
OUTPUT] _ [LCD PANEL] (the defhult
setting) _ | _ _ _ _'_n.
• To record the date/time or camera settings data,
touch _ (MENU) _ [Show others]
[PLAYBACK SET] (under _ [PLAYBACK]
category) _ [DATA CODE] _ a desired
setting _ | --* _ _ _. hr
addition, touch _ (MENU) _ [Show
others] _ [OUTPUT SETTINGS] (under
[GENERAL SET] category) _ [DISP
OUTPUT] --* IV-OUT/PANEL] --* _ --*
|-_|.
• When the screen size of display devices (TV,
etc.) is 4:3, touch _ (MENU) _ [Show
others] _ [OUTPUT SETTINGS] (under
[GENERAL SET] category) _ [TV TYPE]
[4:3] _ _ _ _ _* _.
• When you connect a monaural device, connect
the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.