Using The Sleep Timer; Using The Receiver - Sony STR-DG500 Operating Instructions Manual

Usingthe SleepTimer
You can set the receiver to turn off
autonlatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as t_llows:
24)04)0 ---+ 1-30-00 -_ 1-00-00 -_ 0-30-00
-_ OFF
When Sleep Timer is being used, "SLEEP"
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEER The remaining time appears
oi/the display. If you press SLEEP again, the sleep
timer will be canceled.
Recording usingthe
receiver
You can record onto a MiniDisc or audio tape
using the receiver. See the operating
instructions supplied with your MD deck or
tape deck.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
3
4
Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
Prepare the recording
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Sound adjnstn/ents do not affect the signal output
from the MD/TAPE OUT jacks.
• The audio signals input to the MULTI CH IN jacks
are not output from the analog OUT jacks even
when MULTI CH IN is selected. The analog audio
signals (if the current or previously used input are
output.
.o
O
..{j
o
63 G8