Sony STR-DG500 Operating Instructions Manual page 72

Models of area code AR, KR
Stereo Power Oulpul 1), Reference Power
Oulpul
1)2)
8 ohms 20 Hz - 20 kHz, THD 0.1)9%
85 W + 85 W 1),
71,)W + 71,)W 3), 111,)W/oh
8 ohms 1 kHz, THD 1,).7%
100 W +
100
W 1),
90 W + 91,)W 3), 120 W/oh
8 ohms 1 kHz, THD 10%
125W+ 125W l),
ll1,)W+ IlOW 3),
15o W/oh
Models of area code TH6
Stereo Power Oulpul 1), Reference Power
Oulpul I)2)
8 ohms 20 Hz - 20 kHz, THD 0.09%
70 W + 70
W 1),
60 W + 60 W 3), 91") W /ch
8 ohms 1 kHz, THD 0.7c7_
81') W + 80
W 1),
70 W + 71')W 3), lI)0 W/oh
8 ohms 1 kHz, THD 10%
11,)0W + 100
W 1),
90 W + 91,)W 3), 125 W/oh
l)Measured under the following coudilions:
Area code Power requirements
U, CA 120 V AC, 60 Hz
(7EL, CEK, AR, KR, 230 V AC, 50 Hz
TH6, SP
E2, AU 240 V AC, 50 Hz
TW 110 V AC. 60 Hz
2)Reference po'_xer output for front, center, surround
and surround back. Depending on the sound field
settings and the source, there ma_ be no sound
output.
3)Measured under the fl_llowiug conditions:
Area code Power requirements
AR, KR, TH6 220 V AC, 50 Hz
Frequency respouse
Analog
Inputs
Analog
Digital (Coaxial)
Digital (Optical)
Outputs (Analog)
AUDIO OUT
SUB WOOFER
Tolle
Gain levels
11,) H z - 70 kHz
+0.5/-2 dB (with sound
field and tone bypassed)
Sensitivity: 50It mV/
50 kohms
S/N4): 96 dB
(A, 51)0mV 5))
Impedance: 75 ohms
S/N: 100 dB
1,A,20 kHz LPF)
S/N: 100 dB
1,A,20 kHz LPF)
Voltage: 500 mV/10 kohms
Voltage: 2 V/I kohm
_+6dB, I dB step
4)INPUT SHORT (with sound field and tone
bypassed).
5)Weighted network, input level.
FM tuner section
Tuning range 87.5 - 108.1) MHz
Intermediate fi'equency
11,).7MHz
Useable sensitivity 11.2 dBf, 1 gV/75 ohms
S/N
Mono/Stereo 76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo 0.3_/d0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz- 15 kHz,
+0.5/ 2 dB
72G8