Specifications - Sony STR-DG500 Operating Instructions Manual

PROTECT
Irregular current is outpnt from tile
speakers. The receiver will automatically
turn off after a few seconds. Check the
speaker connection and turn on the power
again.
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing tile receiver's memory may remedy
the proNem (page 25). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver's memory
To clear See
All memorized settings page 25
Customized sound fields page 53
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U only)
With 8 otnn loads, both channels driven, from
20 - 20,000 Hz; rated 100 watts per channel
mininmm RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of m'ea code U, CA
Stereo Power Output 1), Ret)rence Power
Output I)2)
8 ohms 21) Hz - 20 kHz, THD 0.09%
100 W + 100 W, 110 W/oh
8 ohms 1 kHz, THD 0.7%
ll0W+ II0W, 120 W/oh
8 ohms 1 kHz. THD 10%
125 W + 125 W. 150 W/ch
Models of area code CEL, CEK, E2, TW, AU
Stereo Power Oulput 1), Relerence Power
Oulpul
1)2)
8 ohms 20 Hz 20 kHz, THD 0.09_/_
85 W + 85 W, 110 W/ch
8 ohms 1 kHz, THD 0.7c7_
100 W + 100 W, 120 W/ch
8 ohms 1 kHz, THD 10c7_
125 W + 125 W, 150 W/ch
Models of area code SP
Stereo Power Output 1), Reference Power
Oolpul I)2)
8 ohms 20 Hz - 20 kHz. THD 0.09_/_
70 W + 70 W, 90 W/ch
8 ohms 1 kHz. THD 0.7_/_
80 W + 80 W, 100 W/ch
8 ohms 1 kHz, THD 10c7_
100 W + 100 W, 125 W/ch
ca.
o.
3
continued_
71G8