Table of Contents
Advertisement
XDR-S100CD
Playing tracks repeatedly
(repeat play)
You can play tracks repeatedly in normal, shu e or
program play modes.
1
Follow steps 1 and 2 in "Playing a CD"
2
Proceed as follows:
To repeat
Do this
1
A single track
2
3
1
All tracks on the
CD
2
1
Tracks in
random order
2
3
1
Programmed
tracks les
2
3
To cancel repeat play
Press REPEAT on the remote until "REPEAT" disappears
from the display.
Playing tracks in random order
(shu e play)
You can play tracks in random order.
1
Follow steps 1 and 2 in "Playing a CD"
2
Press MODE until "SHUFFLE" appears in the
display.
3
Press V (# on the remote) to start shu e
play.
To cancel Shu e Play
Stop playing rst.
en press MODE until "SHUFFLE"
disappears from the display.
Tip
During shu e play, you cannot select the previous track
by pressing N ( on the remote).
Creating your own programme
(programme play)
You can arrange the playing order of up to 20 tracks on a CD.
1
Follow steps 1 and 2 in "Playing a CD"
2
Press MODE until "PROGRAM" appears in
the display.
3
Press . or N or turn
TUNING/SELECT to select the track and then
press ENTER to add it to the programme.
Repeat to programme other tracks in the order that
you want.
A er programming the rst track, "STEP 1" appears,
followed by selected track.
Each time you add a track, a step number is added.
4
Press V (# on the remote) to start
Programme Play.
To cancel programme play
Stop playing rst.
en press MODE until "PROGRAM"
disappears from the display.
To clear the programme you set
Press CLEAR on the remote.
[
Stop playback rst.
[
Tip
You can play the same programme again, since the
programme is saved until you eject the CD.
Connecting optional
component
To enhance your system, you can connect optional
components. Be sure to turn o the power of each
component before making any connections. For details, refer
to the instruction manual of the component to be connected.
To listen to the sound from optional
components in the unit
1
Connect the AUDIO IN jack on the unit to
the line output jack of the portable digital
music player or other components using an
audio connecting cable* (not supplied).
* For a PC: use a cable which lls the connector of
your PC. For a TV or VCR: use a cable with a stereo-
mini plug on one end and two phono plugs on the
other end. For a portable digital music player: use a
cable with a stereo-mini plug on both ends.
2
Turn the unit and the connected component on.
3
Press AUDIO IN and start playing sound on
the connected component.
e sound from the connected component is output
from the speakers.
To listen to the sound of the unit by optional
components
Connect the LINE OUT jack on the unit to the line in
jack of the other components.
Note
e volume and tone adjusted on this unit does not
a ect the sound output from LINE OUT.
6
Using the timers
e unit o ers three timer functions. If you use the
alarm timer or guide timer with the sleep timer, the sleep
timer has priority.
Setting the sleep timer
e sleep timer allows you to fall asleep to the sound of a
CD, the radio, or input from the AUDIO IN function. It
Press REPEAT on the remote until
does this by automatically turning o the CD, the radio, or
"REPEAT 1" appears.
input from the AUDIO IN function a er a preset duration.
Press N or . to
1
select the track that you want to
Press SLEEP while the unit is turned on.
repeat.
"SLEEP" appears in the display.
Press V ( # on the remote).
2
Press SLEEP to set the sleep timer duration.
Press REPEAT on the remote until
Each time you press SLEEP, the duration changes as
"REPEAT" appears.
follows:
Press V ( # on the remote).
"AUTO*" 7 "60" 7 "30" 7 "20" 7 "10" 7 "OFF".
Start shu e play (see "Playing
* When you select "AUTO, " the CD stops playing in
tracks in random order").
90 minutes at most and the unit goes o
Press REPEAT on the remote until
automatically. When you are listening to the radio,
"REPEAT" appears.
the radio goes o in 90 minutes.
Press V ( # on the remote).
Program tracks (see "Creating
e unit automatically turns o when the duration time
your own programme").
is passed.
Press REPEAT on the remote until
4 seconds a er you have nished the duration setting
"REPEAT" appears.
and released SLEEP, "SLEEP" appears in the display and
Press V ( # on the remote).
back light will turn o , then the sleep timer starts.
unit will play for the duration you set, and then shut o .
Note
Even if the duration is passed, the optional component
connected with AUDIO IN is not turned o .
To change the sleep timer setting
Repeat step 2 to select the desired sleep timer setting
even a er the sleep timer has been activated.
To deactivate the sleep timer
Press POWER.
[
Press SLEEP to set the sleep timer "OFF, " only the sleep
[
timer will be cancelled (the unit stays ON).
Setting the alarm timer
You can set the unit to turn on automatically at a preset time.
e timer sound is selectable from DAB, FM, CD and
BUZZER.
Make sure you have set the clock.
To set the alarm timer
1
Press MENU to show the menu display.
2
Turn TUNING/SELECT ( or on the
remote) to select "TIMER SETTING, " then
press ENTER.
3
Turn TUNING/SELECT ( or on the
remote) to select "TIMER A, " then press
ENTER.
4
Turn TUNING/SELECT ( or on the
remote) to select "SETTING, " then press
ENTER.
5
Turn TUNING/SELECT ( or on the
remote) to set the hour for on time, then press
ENTER.
e minute ashes. Perform the procedure above to
set the minute.
6
Repeat step 5 to set the time to stop playing.
7
Turn TUNING/SELECT ( or on the
remote) to select the desired sound from DAB,
FM, CD and BUZZER, then press ENTER.
8
Turn TUNING/SELECT ( or on the
remote) to adjust the wake-up volume, then
en press STOP Y.
press ENTER.
If you select DAB or FM, turn TUNING/SELECT
( or on the remote) to select the desired
preset number, then press ENTER.
When you select the preset number "P--" during
DAB service reception, the most recent reception
service is received.
9
Press POWER to turn o the unit.
e unit turns on about 15 seconds before the preset
time.
If the unit is on at the preset time, the alarm timer
will not play.
To stop the alarm timer
Press POWER.
To deactivate the alarm timer
Perform the same procedure as in step 4 to select "OFF. "
"TIMER" and "A" turn o in the display.
Setting the guide timer
To set the guide timer
You can set up to 10 guide timers using the EPG display
based on the downloaded DAB data.
Make sure you have download the EPG.
1
Follow steps 1 and 2 in "To set the alarm
timer. "
2
Turn TUNING/SELECT ( or on the
remote) to select "GUIDE, " then press ENTER.
EPG appears in the display. "TIMER, " "B, " "GUIDE"
and the lowest number of the guide timer on which a
programme is not stored ash in the display.
3
Turn TUNING/SELECT ( or on the
remote) and press SCAN + or – to select the
desired programme, then press ENTER.
4
Turn TUNING/SELECT ( or on the
remote) to adjust the volume, then press
ENTER.
If you select the stored number in step 2, do the
following:
1
Turn TUNIG/SELECT ( or on the
remote) and press SCAN + or – to select the
desired programme, then press ENTER.
"SETTING" and "CANCEL" appear in the display.
2
Turn TUNIG/SELECT ( or on the
remote) to select "SETTING, " then press
ENTER.
3
Turn TUNIG/SELECT ( or on the
remote) to adjust the volume, then press
ENTER.
e setting is completed.
To erase the guide timer
1
Perform the same procedure as in steps 1 and
e
2 in "To set the guide timer, " turn TUNING/
SELECT ( or on the remote) to
select the desired number and then press
ENTER.
"SETTING" and "CANCEL" appear in the display.
2
Turn TUNING/SELECT ( or on the
remote) to select "CANCEL, " then press
ENTER.
To set the guide timer directly by EPG.
1
Following "To display the EPG" and display
e unit will turn o .
the desired EPG to setting the timer.
2
Press ENTER.
"TIMER, " "B, " "GUIDE" and the lowest number of
the guide timer on which a programme is not stored
ash in the display.
3
Turn TUNING/SELECT ( or on the
remote) to adjust the volume, then press
ENTER.
Notes
You cannot set the guide timer if the following
[
indications appear.
–"TIMEOVERLAPPING": On-time of two or more
guide timers overlap.
–"TIMER NG":
same.
–"TIMER FULL": Maximum numbers of guide timers
have been already set.
If a guide timer activates while the power is turned on,
[
the power is not turned o when the o -time of the
guide timer passes.
If another guide timer activates while a guide timer
[
sounds, the latter one has priority.
If the on-time of the alarm timer and guide timer is
[
same, guide timer has priority.
Other useful functions
Adjusting the tone
1
Press POWER to turn on the unit.
2
Press MENU to show the menu display.
3
Turn TUNING/SELECT to select "TONE
CONTROL, " then press ENTER to show the
setting display.
4
Turn TUNING/SELECT to adjust "TREBLE, "
then press ENTER.
5
Turn TUNING/SELECT to adjust "BASS, " then
press ENTER.
Tips
e adjustable range of "TREBLE" and "BASS" is from
[
–4 to +4.
You can adjust "TONE" directly by pressing TONE on
[
the remote control. Press or to adjust the
tone, then press ENTER.
Using the power saving mode
is unit has a power saving mode in AC operation.
While the AC power adaptor is connected in power o ,
press DISPLAY for more than 2 seconds.
e following will occur:
Time display is turned o
[
Remote control does not work
[
EPG is all erased
[
To reset the unit
If the radio fails to function properly, do the following:
Press and hold STOP, ENTER and POWER at the same
time for a few seconds.
"RESET" appears in the display and the unit will revert
to the factory preset.
e on-time and o -time are the
Hide quick links:
Advertisement
Table of Contents
