Sony STR-DG500 Operating Instructions Manual page 54

In case of poor FM stereo
reception
If the FM stereo reception is poor and
"STEREO" flashes on the display, select
monaural audio so that the sound will be less
distorted.
Press FM MODE repeatedly until the
"MONO" indicator lights up on the display.
To return to stereo mode, press FM MODE
repeatedly until the "MONO" indicator on the
display do not light up.
Enter the frequency of a station directly by
using the numeric buttons.
1
2
Press TUNER repeatedly to
select the FM or AM band.
Press TUNING + or TUNING -.
Press TUNING + to scan from low to
high; press TUNING - to scan from high
to low.
The receiver stops scanning whenever a
station is received.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select tire FM
or AM band.
2 Press TUNING MODE repeatedly to select
"AUTO T.'.
3 Press TUNING + or TUNING -.
2
3
-1
.........
-4
Press TUNER repeatedly to
select the FM or AM band.
Youcan also use INPUT SELECTOR on
the receiver.
Press D.TUNING.
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1.0.2._5._0
Example 2: AM 1,350 kHz
Select 1.3.5._0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
54 G8