Sony STR-DG500 Operating Instructions Manual page 15

3a: Connecting theaudiocomponents
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
Alter hooking up all your components,
proceed to "4: Connecting the antennas" (page
24).
Component to be connected
Component With Page
Super Audio Multi-channel audio 16
CD player/CD output a/
player Analog audio output 17
only b)
MD deck/Tape Analog audiu uutpul 17
deck only bl
'°Model with MULTI CH OUTPUT jacks, etc. This
connection is used tu uutput audio decuded by the
componeut's internal multi-channel decoder
thruugh this receiver.
blMudel equipped only with AUDIO OUT L/R
.jacks. etc.
The sound quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks of
your components.
COAXIAL IN @
Digital
oqpL
_rmm
Analog
@
AUgJlO IN
High
{,Q
,.%
Q.
15G8