Naming Inputs; Changing The Display - Sony STR-DG500 Operating Instructions Manual

Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
"I-LEVEL" appears on tile display.
3
Press control button #/_
repeatedly to select either
"5-AUDIO" or "6-VIDEO".
4
5
6
Press the control button or
control button * to enter the
menu.
Press control button ,14, to
select "NAME IN".
Press the control button or
control button * to enter the
parameter.
Tile cursor fhtshes and you can select it
character. Follow the procedure given in
"To create an index name" (page 58).
To return to the previous display
Press control bntton _,.
Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, tile display
changes cyclically as follows.
All inputs except the FM and AM
band
Index name of tile input a)_ Selected inpnt
Sound field currently applied
FM and AM band
Program Service nmne b) or preset station
name a) _ Frequency _ Program Type
indication b) _ Radio Text indication b)
Current Time indication (in 24-hour system
mode) b) _ Sound field currently applied
a)Index name appears only when you have assigned
one to the input or preset station (page 58, 62).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
b)During RDS reception only (models of area code
CEL, CEK only) (page 59).
62 G8