Sony STR-DG500 Operating Instructions Manual page 56

*" Hold down MEMORY/ENTER
and press I/_ to turn the
receiver back on.
"AUTO-BETICAL SELECT" appears on
the display and the receiver scans and
stores all the FM and FM RDS stations in
the broadcast area.
For RDS stations, the tuner first checks
for stations broadcasting the same
program, then stores only the ones with
the clearest signal. The selected RDS
stations are sorted alphabetically by their
Program Service name, then assigned a 2-
character preset code. For more details on
RDS, see page 59.
Regular FM stations are assigned 2-
character preset codes and stored alter the
RDS stations.
When this process is finished, "FINISH"
appears on the display momentarily and
the receiver returns to normal operation.
Notes
• Do not press :,n_ button on tile receix er or supplied
remote during autobetical operation, except I1(_).
• If you move to another area. repeat this procedure
to store stations in your new area.
• For details on tuning the stored stations, see
"Tuning to preset stations" (page 57).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
Presetting radio stations
You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
2
_Era
RI_I{IP
:NEMORY DgDNE U
........... r
0/0 ..... .....
N
g_R Egl_ EN
-1
-3,5
TUNING
-- +/_
Press TUNER repeatedly to
select the FM or AM band.
You c:m also use INPUT SELECTOR on
the receiver.
Tune in the station that you
want to preset using Automatic
Tuning (page 54) or Direct
Tuning (page 54).
Switch tile FM reception mode, if
necessary (page 54).
56 G8