Sony STR-DG500 Operating Instructions Manual page 57

3
4
Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.
"MEMORY" lights up for a few seconds.
Perform steps 4 and 5 before "MEMORY"
goes out.
Press the numeric buttons to
select a preset number.
You cun also press TUNING + or
TUNING to select a preset number.
If"MEMORY" goes out before you select
the preset number, start again from step 3.
Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
The station is stored as the selected preset
ntlnlber.
If"MEMORY" goes out before you press
MEMORY, start again from step 3.
Repeat steps 1 to 5 to preset
another station.
Numeric
buttons
ENTER
2
1
2
Press TUNER repeatedly to
select the FM or AM band.
Press PRESET + or PRESET -
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
You can also press the numeric btlttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Using the controls on the
receiver
1
Tnrn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
"PRESET T.".
3 Press TUNING + or TUNING repeatedly
to select the preset station you want.
-1
O
"o
-1
57G8