Sony DG510 - STR AV Receiver Service Manual

SERVICE MANUAL

Ver. 1.0 2007. 01
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered
trademarks of DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI TM ) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code US only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code US, CND 1)
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
90 W + 90 W
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
100 W + 100 W
2)
Surround Mode Output Power (8 ohms 1 kHz,
THD 10%)
130 W/ch
Sony Corporation
9-887-536-01
2007A04-1 Home Audio Division
© 2007. 01 Published by Sony Techno Create Corporation
STR-DG510
Photo: Black type
SPECIFICATIONS
Models of area code AEP, UK
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
Surround Mode Output Power
THD 10%)
1) Measured under the following conditions:
Area code
US, CND
AEP, UK
2) Reference power output for front, center and surround
speakers. Depending on the sound field settings and the
source, there may be no sound output.
MULTI CHANNEL AV RECEIVER
US Model
Canadian Model
AEP Model
UK Model
1)
85 W + 85 W
100 W + 100 W
2)
(8 ohms, 1 kHz,
130 W/ch
Power requirements
120 V AC, 60 Hz
230 V AC, 50 Hz
– Continued on next page –
1