Sony STR-DG500 Operating Instructions Manual page 12

Name Function
[] Control
buttons
After pressing AMP MENU
/[_), DVD MENU/[_/, or
MENU ([_), press file control
button t, _, * or ,*, to select
tile settings. When you press
DVD MENU or MENU, press
tile control button to enter tile
selection.
[] DISPLAY
Press to select information
displayed on tile TV screen of
tile VCR. satellite tuner. CD
player, DVD player, or MD
deck.
[] TOOLS Press to display options
applicable to the entire disc
/e.g. disc protection), recorder
(e.g. audio settings during
recording/, or multiple items
on a list menu (e.g. erasing
multiple titles).
[] 4- Press -/-- and TV/[]) at the
same time to select the
channel entry mode. either
one or two digits of tile TV.
>10/. Press to select
track numbers over 10 of the
VCR. satellite tuner. CD
player or MD deck.
channel numbers of tile
Digital CATV terminal.
CLEAR Press to
clear a mistake when you
press tile incorrect numeric
button.
return to continuous
playback, etc. of the satellite
tuner or DVD player.
[]
Numeric
Press to
buttons preset/tune to preset
(number 5at) stations.
select track numbers of the
CD player. DVD player or
MD deck. Press 0/10 to
select track number 10.
select channel numbers of
tile VCR or satellite tuner.
Press the numeric buttons atKl
TV ([]) at tile same lime to
select the TV channels.
[] A.F.D. Press to select A.F.D. mode.
[]
2CH
Press to select 2CH STEREO
mode.
Name Function
[] Input buttons Press one of the buttons to
select tile component you
want to use. When you press
arty of the input buttons, the
receiver turns on. Tile buttons
are factory assigned to control
Sony components as follows.
You can change the button
assignments lk_llowing the
steps in "Changing button
assignments" on page 64.
Button Assigned Sony
component
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR nlode 2)
VIDEO 3 Not assigned
DVD DVD player
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER Buill-in tuner
[] TWVIDEO
SLEEP
[] AUTOCAL
Press TV/VIDEO and TV
([]) at the same time to select
tile input signal/TV input or
video input/.
Press to activate the Sleep
Timer fimction and tile
duration which the receiver
turns off automatically.
Press to actiw(te tile Auto
Calibration function.
a)The number 5. MASTER VOL +. TV VOL +. and
[2:> buttons have tactile dots. l Jse tile tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on tile model.
• The above explanation is intended to serve as art
example only. Therefore. depending on the
component, the above operation may not be
possible or may operate differently than described.
12G8