Naming Inputs - Sony STR-DG900 Operating Instructions Manual

Assignable inputs for HDMI
input
HDMI input Assignable
inputs
HDMI 1 NONE
VIDEO 1
VIDEO 2
VIDEO 3
DVD
TV/SAT
MD/TAPE
SA-CD/CD
HDMI 2 NONE
VIDEO 1
VIDEO 2
VIDEO 3
DVD
TV/SAT
MD/TAPE
SA-CD/CD
Note
You cannot reassign more than one HDMI input to
the same input.
Display
HDMI 1– NONE
HDMI 1– VIDEO 1
HDMI 1– VIDEO 2
HDMI 1– VIDEO 3
HDMI 1– DVD
HDMI 1– TV/SAT
HDMI 1– MD/TAPE
HDMI 1– SA-CD
HDMI 2– NONE
HDMI 2– VIDEO 1
HDMI 2– VIDEO 2
HDMI 2– VIDEO 3
HDMI 2– DVD
HDMI 2– TV/SAT
HDMI 2– MD/TAPE
HDMI 2– SA-CD

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP and then press
MENU.
"1-LEVEL SET" appears on the display.
3
Press control button V/v
repeatedly to select either
"5-AUDIO SET" or "6-VIDEO
SET".
4
Press the control button or
control button b to enter the
menu.
5
Press control button V/v to
select "NAME IN".
6
Press the control button or
control button b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 70).
To return to the previous display
Press control button B.
81
US