Changing Channels - Samsung LN-S4092D User Manual

6. Press the ENTER_ button.
Press the _ or v buttons to select "Yes" or "No", then the ENTER_ button.
"Select the time zone in which you live" menu is automatically displayed.
7,
Press the * or v buttons to highlight the time zone for your local area (and to
move the highlight to the appropriate time zone on the map of the United States).
Press the ENTER_ button. If you have received a digital signal, the time will
be set automatically.
If not, see page 40 to set the clock.
8. The message "Enjoy your watching." is displayed.
When you have finished,press the ENTER_ button.
If you want to reset this feature...
1, Press the MENU button.
Press the _ or _ buttons to select "Setup", then press the ENTER_ button.
2, Press the A or _ buttons to select "Plug & Play".
Press the ENTER_ button.
For further details on setting up options, refer to the previous page.
Plug & Play can only be accessedin the TV mode.
Changing Channels
Using the Channel Buttons
t, Press the CH ® or CH ® button to change channels.
When you press the CH @ or CH ® button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 16 to memorize channels.
Using the PRE-CH Button to select the Previous Channel
t, Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channets that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
English- 14