Samsung LN-S4092D User Manual page 59

Installing the Wall Mount Kit (LN-S4692D)
Refer to the correct installation guide according to your wall bracket.
This LCD TV accepts a 600 mmx 400 mm VESA-compliant mounting interface pad.
Installation Notes
1. Contact a technician for installing the wall bracket.
2. Samsung Electronics is not responsiNe for any damages to the product or injury to yourself or others if you elect to perform the wall installation.
3. This product is for installing on cement walls. The product may not stay in place when installed on piaster or wood.
Parts (Wa!! attachment panel is so!d separately. Check with your dealer.)
Only use the components and accessories shipped with the panel.
P,ostic Honge, :4 B TXO ?
U
Screw G 44 Anchor : 44
Left: 1 Right: 1 M8 X L40
Wall-Bracket Wall-Bracket Accessories
How to assemble the Wall Mount Bracket
1 Q Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
Hinge
(Left)
Captive Screw
"_ Wall Bracket
There are two hinges
_orrect one. "_
Hinge
(Right)
® Before drilling into the wall, check if the length between the two
locking holes at the back of the product is correct. If the length is too
short or long, loosen all or some of the 4 screws on the wall bracket
to adjust the length.
Length between tile
two locking holes
® Check the installation diagram and mark the drill points on the wall.
Use the 5.0 mm bit to drill holes deeper than 35 ram.
Fix each anchor in the corresponding hole. Match each of the
brackets and hinge holes to the corresponding anchor holes and
insert and tighten the 11 screws @.
English-57