Samsung LN-S4092D User Manual page 19

Setting Up Your Remote Control
AfTer it has been set up properly, your rcmole control can operate in five different modes: TV. VCR, Cable, DVD, or Set-Top Box.
Pressing the corresponding button on the remote conlrol allows you to switch between these modes, and control whichever piece of
equipment you choose.
_* The remote control might not be compatible with all DVD Players. VCRs, Cable boxes, and Set-Top Boxes.
(%(-3(3('3
565
EZZI EZ_ EZ3 _
Setting Lp the Remote to Operate Your VCR
1. Turn off your VCR.
2. Press the VCR button on yourTV's remote control.
3. Press the SEF button on your TV's remote control.
4. Using the number buttons on your remote control, enter three digits of the VCR code listed on
page 19 of this manual for your brand of VCR. Make sure you enter three digits of the code,
even if the first digit is a "0". (if more than one code is listed, try the first one.)
5. Press the POWER 0 button on the remote control. Your VCR should turn on if your remote is
set up correctly.
if your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of VCR. if no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons still contmt your TV's volume.
565
EZ_ EZ_ E:ZJ _
k, j
Setting Up the Remnle to Operate Your Cable Box
1. Turn off your cabte box.
2. Press The CABLE button on your TV's remote control.
3. Press the SEr button on your TV's remote control.
4. Using the number buttons on your remote control, enler Three digits of the cable box code
lisled on page 20 of this manual for your brand of cable box. Make sure you enter three digits
of the code, even if the first digit is a "0". (If more than one code is 1isled, try the first one.)
5. Press the POWERo button on the remote control.
Your cable box should turn on if your remote is set up correctly.
if your cable box does not turn on afler set-up, repeat sleps 2, 3 and 4, but try one of the olher
codes listed for your brand of cable box. if no other codes am lisled, try each code,
000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "CATV" mode, the volume buttons still control your TV's volume.
English- 17