Samsung LN-S4092D User Manual page 18

Memorizing the Channels
Your TV can memorize and store all of the available channels for boih "off-air' (anienna) and cable channels.
After the available channels are memorized, use the CH ® or CIt _ buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There am three sieps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic).
Selecting the Video Signal-source
Befnre your television can begin memorizing the available channels, you must specify the type of signal somve that is connecled to the
TV (i.e. an antenna or a cable syslem).
t. Press the MENU button to display the menu.
Press the A or - buttons to select "Channel", then press the ENTER_ button.
2.
Press the ENTER_ button select "Antenna".
Press the _- or - buttons to select "Air" or "Cable", then press the
ENTER_ button,
Press the EXIT button to exit,
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu,
Press the A or - buttons to select "Channel", then press the ENTER_ button.
2. Press the _ or ,,, buttons to select "Auto Program", then press the ENTER_ button.
3.
Press the _ or _ buttons to select the antenna connection, then press the
ENTER_ button.
Air: "Air" antenna signal. / Cable: "Cable" antenna signal. /
Air+Cable: "Air" and "Cable" antenna signals.
4. After all the available channels are stored, the "Auto Program" menu reappears.
Press the EXIT button to exit.
MTS SR$ e_;AP
riq F_ Fiq F-Xq
AUTO PROG, AOI_BEL C@Ti0N gH
}S_ O RESIET
[_ Alternately, you can press the AUTO PROG. button on the remote control to bring up
the Auto Program menu,
English- 16