Changing Channels; Adjusting The Volume - Samsung LN26T71B Owner's Instructions Manual

Changing Channels

Using the Channel Buttons
Using the PRE-CH Button to select the Previous Channel

Adjusting the Volume

Using Mute
At any time, you can cut off the sound using the MUTE button.
All manuals and user guides at all-guides.com
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the or
2. Press the ENTER
3. The message "Start Plug & Play" is displayed.
If you wish more details on the options of the setup, refer to the previous page.
Plug & Play can only be accessed in the TV mode.
1. Press the CH or CH
When you press the
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 16 to memorize channels.
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
1. Press the VOL
1. Press MUTE button and the sound cuts off.
The word "
2. To turn mute off, press the MUTE button again, or simply press the
VOL or VOL
English-14
button to select "Setup", then press the ENTER
button again, to select "Plug & Play".
button to change channels.
CH or CH
button, the TV changes channels in sequence.
or VOL buttons to increase or decrease the volume.
" will appear in the lower-left corner of the screen.
buttons.
button.