Weider CrossBow Platinum WESY78730 User Manual page 8

8. 8
PulltheSeatKnob(48)outandslidetheSeat
Carriage (44)ontotheRail(4)as shown. E ngage
theKnobintoa holein theRail.
Press the RailCap(49)ontothe Leg(5).Attach
theLegtotheRail(4)withtwoMI0 x 64mm
Button Bolts(80),four M10Washers (106), a nd
twoM10NylonLocknuts ( 103).
g.
Press a 45mm Square inner Cap (110) into the
Rail insert (31).
Attach the Rail Insert (31) inside of the Rail (4)
with two MI0 x 64mm Button Bolts (80), four M10
Washers (106), and two MI 0 Nylon Locknuts
(103). Make sure the Bolts go through the indi-
cated holes in the Rail insert.
10. Lubricate an MI0 x 125mm Button Bolt (89) with
grease. Attach the Rail (4) to the Row Plate (28)
with the Bolt, two M10 Washers (106), two 31mm
Spacers (30), and an MI0 Nylon Locknut (103).
Do not overtighten the Locknut; the Rail must
be able to pivot easily.
Tighten the Storage Knob (29) into the Row Plate
(28) and the Rail (4).
11. Wet a Squat Arm (20) with soapy water. Slide a
Small Foam Pad (24) and a Short Handgrip (21)
onto the Squat Arm.
Repeat with the other Squat Arm (20).
Tighten the Squat Knob (27) into the Squat
Carriage (19) and the Squat Arm Pivot Tube (not
shown).
10
11
103
106
49
106
44 48
\ Holes on
this side
8O
103 106
31
110
4
106
8O
103
30
Lubricate
21