Attaching The Accessories; Attaching The Curl Pad; Attaching The Curl Bar - Weider CrossBow Platinum WESY78730 User Manual

ATTACHING THE ACCESSORIES
To attach the Lat Bar (82) to the high pulleys, first
attach the high pulley to the resistance system (see
ATTACHING THE HiGH PULLEYS on page 14). Then,
attach the Lat Bar to a High Cable (101)with a Cable
Clip (94). Attach the Lat Bar to the other High Cable
in the same manner.
The Handles (not shown) and the Ankle Strap (not
shown) can be attached to the High Cables (101) or
the lower cabJe (not shown) with Cable CJips (94).
Attach the Hip Strap (not shown) to the ends of the
lower cable with two CabJe Clips.
ATTACHING THE CURL PAD
To attach the Curl Pad (43), insert the Curl Post (42)
into the Leg (5). Secure the Curl Post with the Curl
Knob (59).
Remove the Cur{ Pad (43) from the resistance
system when performing an exercise that does
not require it.
ATTACHING THE CURL BAR
To use the Curl Bar (53), first attach the leg lever to
the leg (see USING THE LEG LEVER on page 14).
Attach the Curl Bar to the hook on the Leg Lever (56)
with a Cable Clip (94).
101
k
82
/
56
\
Y
59
\\\.\
15