Continuous Embroidery - Singer XL-6000 Instruction Manual

Continuous Embroidery
The Continuous Embroidery Package consists of Continuous Embroidery frame and Continuous Embroidery card.
For most successful operation:
Please read all instructions in the instruction manual and this instruction sheet before using.
Name of parts.
Continuous Embroidery frame
Use this frame only
for performing
Continuous-Embroidery.
#5006 Continuous Embroidery card
Insert the card.
Built-in patterns.
i
On the Embroidery screen Insert the Continuous
Embroidery card #5006.
Press _ pictogram.
2
Select pattern.
Press _ pictogram of the pattern that you with to sew.
Press _
pictogram.
press _ pictogram.
,)
3
Installing the Continuous Embroidery frame
,," Fully raise embroidery presser foot and place the
embroidery frame under it.
4
Setting the fabric
Raise the lever and lift the upper frame.
Securing fabric in embroidery frame.
Loosen the guide screw.
Position fold edge against guide.
Tighten the guide screw.
Lower the lever to lower the upper frame.
93