Automatic Wind-In-Place Bobbin Winding - Singer XL-6000 Instruction Manual

Automatic Wind-In-Place bobbin winding
ii
• Automatic bobbin winding using needle thread (Standard Sewing Machine)
Bobbin to be used
* Be sure to use special bobbin
illustrated above. Standard
bobbins cannot perform
Wind-In-Place bobbin winding.
* Applicable thread sizes are
#30 to #100. Use standard
presser foot (A).
7
Be sure to turn off the power switch
before installing a bobbin.
Install an empty bobbin
and close bobbin case
cover.
After threading machine,
2
press _ key.
*When thread remains on bobbin,
bobbin winder cannot be operated.
Select amount of
thread to be wound
_._ onto the bobbin.
Slide drop feed lever to
4
right side.
13