Barracking - Singer XL-6000 Instruction Manual

Bartacking
Stitch pattern to
be selected
Presser foot to be
selected
i
uttonhole
foot (E)
Bartacking is used to reinforce part of seam that is likely to ravel.
* Bartacking length is determined by pressing reverse stitch button.
Maximum number of bartacking stitches is 20. When maximum
number of stitches is reached, machine will automatically stop and
travel back in opposite direction.
* In the case where buttonhole foot is not leveled at multi-layered
portion of fabric, use a filler cloth or cardboard.
f
Example of appl_
ndsk,rts )i
_ _ocketsl
\ J
Draw thread to side of
1 buttonhole foot.
/
_ -_']O'cm _
Pass needle thread through and
under buttonhole foot.
Place fabric under
2
buttonhole foot.
Start machine with buttonhole
3
lever raised.
/
/
/
Buttonhole
lever
A press on start/stop button will cause
machine to start straight stitching.
When predetermined When predetermined posi-
position is reached, press tion is reached, press
reverse stitch
4
reverse stitch button. 5 , bu_on.
i,p/'_--// I _/% /
/ =_' _ B "u i'lz¢/
,/_/
...o /
\!il _ \ Ii /_ /,;
Machine sews straight stitches until Machine stops after sewing bar
sewing starting position is reached, tacks.
Then, machine automatically
returns while sewing zigzag stitches
until predetermined position is
reached.
38