Singer XL-6000 Instruction Manual page 17

Press Thread Trimming
1
Button. *
/
Cut thick thread or special-
purpose thread with a pair
of scissors.
Needle moves until its
2
upper position is reached.
3
Raise presser foot lifter.
//_-er automatic thread
( trimming, it is not necessar_
_. bring t _; e bobbin th!ead uP'to
th e tep_
Both needle thread and
bobbin thread are
trimmed. Now, you can
take out your finished
4
fabric.
_i! ii
Seams and stitches
will not pull apart if
reverse stitches are
sewn at the start and
end of the sewing.
'Im
I _i_ [2]
[!]
Fabri c
I
I
' _[31
i,
Jl
1 Press Reverse Stitch Button.
2
Begin sewing.
3
Press Reverse Stitch Button.
r l m
* Sewing machine will continue reverse stitching as long as reverse stitch button is pressed.
* Sewing machine sews reverse stitching at a low speed.
* In the case of pattern sewing such as zigzag stitching, machine will perform back tacking.
f
Automatic back tacking
In the case where machine is operated after pictogram has been pressed, machine will
sew reverse stitching (back tacking) of three stitches, then start normal stitching.
When seam end is reached, press reverse stitch button. Then, machine will sew reverse stitching
(back tacking) of three stitches, automatically cut the thread and stop.
(See page 29.)
16