Zigzag Stitch - Singer XL-6000 Instruction Manual

Zigzag stitch
%, :
i
!iill
Stitch pattern to Presser foot to
be selected be selected
Standard presser
foot (A)
For overcasting
Position fabric under presser
foot so that needle enters
just fabric edge.
For applique
To sew curved part, select
zigzag stitch pattern (small) or
(medium) to produce narrrew
width and short length stitches.
Adjust position of fabric so that
needle enters slightly outside
applique parts.
Automatic back tacking
Select a stitch pattern to be sewn and press pictogram.
Place fabric at sewing starting position and start machine.
/,:_' I' r
t. L
>
J
7
t
Sewing machine sews three When predetermined seam
back tack stitches first, and end is reached, press reverse
continuously sews the stitch button. Then, machine
material in normal direction, will back tack three stitches,
stop at predetermined position
and trim both needle thread
and bobbin thread.
* Be sure to stop machine with reverse stitch button. If you stop
machine without pressing reverse stitch button and
re-start sewing from a different sewing position, machine will
start sewing of previous stitch pattern without performing back
tacking (unless you select a different stitch pattern).
Zigzag width/stitch length of zigzag stitch patterns
_'_N.
x co
N
c
1.5
1.5
3
Zigzag width,
automatic
5
1.5
i.
0.2 ~ 4.0
0.2 ~ 4.0
0.2 _ 4.0
* Adjustable range of zigzag width is 0 to 7 ram.
Zigzag width ]
Automatic zigzag width:
Manual zigzag width: Set a new width by changing zigzag
width shown on LCD screen.
To change zigzag width,
or _ pictograms.
Stitch length J
Automatic stitch length:
Manual stitch length: Set a new length by changing stitch
length shown on LCD screen.
To decrease stitch length,
press _ pictogram.
To increase stitch length,
press _ pictogram.