How To Sew Embroidery - Singer XL-6000 Instruction Manual

How to Sew Embroidery
Fabric
Needle thread
-g
o
Bobbin thread
Type of needle
Fuse iron-on stabilizer on wrong side of
fabric with an iron. (Iron temperature
should be set to "low" to "Medium."
Thread designed for sewing machine
embroidery
#40 Weight Rayon Thread recommended
#30 Weight is acceptable alternative.
Bobbin fill thread
Singer Brand Sewing Machine Needles
Size #11/80 or Size #14/90.
(#11/80 needle is recommended for
medium-weight materials.)
Large : Medium Small
Embroidery range
240 mm (length) x 140
mm (width)
Application
Used for large embroidery
pattern such as combined
patterns and muIt)ple hoop
embroidery.
114 mm (length)
x 114 mm (width) I
Used for single
3atterns, etc.
55 mm (length)
x 55 mm (width',
Used for small
embroideries
such as a
name on a
handkerchief.
Continuous embroidery frame
Use this frame for sewing embroidery
inserts and borders that require perfectly
matched repetition.
Outer /
frame
Loosen frame adjusting screw
and place fabric between inner
and outer frames so that marker
lines align with raised marks on
frame.
Slightly tighten frame adjusting
screw and pull fabric edges to
remove slack.
frame
abric
Frame adjusting screw
2. Remove slack
from fabric,
1. Slightly tighten screw.
Once fabric is properly positioned in
embroidery frame with no slack, securely
tighten frame adjusting screw. DO NOT
3
USE SCREWDRIVER TO TIGHTEN!
Tighten
Check to be sure that fabric is
properly tensed.
71