Singer XL-6000 Instruction Manual page 88

_& Specifying POint i'£!_
Touch screen at far left
point along X axis
horizontal line.
1
This will move embroi-
dery frame.
Turn handwheel to check
that needle is positioned
2 directly above X axis
horizontal line.
Press needle position
direction arrows so that
needle point is directly above
X axis horizontal line. For
each needle entry point, be
sure to turn handwheel to
3 verify that needle point is
directly above X axis
Once needle entry point
is correctly specified on
X axis line horizontal
line, press position
4 memory [1] toenter
position of X axis.
16
Start machine.
17
Sewing machine
i_ will embroider
6
pattern located in v
designated position.
* To embroider subsequent part of letter
text, press and repeat data
setting procedure from first step.
Press
87