Advertisement
Once you have performedthe following steps, your refrigerator should be fuBy operational, if not, check
the power supply and electricity source, if you have any questions,contact your SAMSUNG Electronics
service center.
Cable tie
Placethe refrigeratorin an appropriate
location with reasonableclearance between
the wall and the refrigerator.(referto instal-
lation instructionsin this mannal)
When the refrigerator is plugged in,
the interior light should come on when
you open the doors.
- You can arrange the Powercable with this
Cable tie, after you plug in the refrigerator.
Set the temperaturecontrol to the coldest
temperature and wait for an hour.The
freezer should get slightly chilled and the
motor should run smoothly.
Once the refrigeratortemperature is suffi-
ciently low, you can store food in it.
After starting the refrigerator,it takes a few
hours to reach the appropriatetempera-
ture.
- If the refrigerator is not to be used for a long
period of time, you can also arrange the
power cable with this cable clamp located in
the top of the refrigerator as shown.
Cable clamp
TDM System (Time-Divided-Multi-Evaporator
system)
,, Each compartment has an evaporator, microprocessors and a refriger-
ant-control-valve to control the refrigeration cycle. The 4 evaporators
enable improved efficiency and humidity in the fridge. Food odor from
the refrigerator does not affect food in other compartments because
the cooler and air flow systems are separate.
Multi-Flow System
• Cool air circulates through multiple vents on every shelf level. This pro-
vides even distribution of cooling inside cabinets to keep your food
fresh longer.
Door Alarm
Beeper reminds you that the door is open.
Xtra Fresh
TM
• Optimized humidity control keeps vegetables & fruits fresh.
Arctic Select Zone
TM
Drawer
,, Arctic Select Zone Drawer can be changed from a freezer to
refrigerator with the TDM system.You can select Power Freeze,
Freeze, Soft Freeze, or Cool depending on the food stored.
Fresh Select Zone
TM
Drawer
You can select Soft Freeze, Chill, Cool or Fresh depending on the
food stored.
With the Cool and Fresh settings, the humidity is controlled by TDM
system.
Advertisement
