Advertisement
1)Inordertooperate t heicemaker p roperly, water p ressure o f 1.4~8.5kgf/cm 2 (0.14~0.83Mpa,
19.9~120.9psi,
1.37~8.3bar) is required.
Inthisrange a 100ccpaper c upcanbefilled in10seconds.
2)Thewaterfilterremoves p articles. Itdoesnotsterilize o rdestroy anymicro-organisms.
3) Iftherefrigerator is installed i nanareawithlowwaterpressure ( 1.4kgf/cm 2 ,0.14Mpa, 19.9psi,
1.37bar), youshould install a booster p ump tocompensate forthelowpressure.
4) Ensure thewaterstorage t ankinside therefrigerator is preperly f illedinitially. Push thewater
dispenser lever u ntil t hewaterrunsfromtheoutlet.
A universal water S upply k itis available at extra costfromyourdealer. Therefrigerator
NOTE manufacturer
recommends usinga water s upply kitcontaining copper t ubing.
Checking the Parts
Water filter
Water pipe
Pipe-Connect
Water Packing
Tappingscrew
(Case 1)
Connecting
to water supply line
- Shut off the main water supply line and turn the Ice
maker to the off position.
- Locate the nearest cold drinking water line.
- Follow the instructions in the ice maker installation kit.
6
5 4
1. Cold Water line
2. Pipe Clamp.
&Copper
(or Plastic) line
4.Compression
Nut
5.Compression
Sleeve
6.Shut Off Valve
7.Packing Nut.
32
Advertisement
