Advertisement
Making small adjustments
between doors.
if the door of fridge
is lower than that of the freezer,
___
,_"
adjustment part
1) If you open the Fresh Select Zone Door (@), you can see the hinge-mid ((2)).
2) insert enclosed
hex wrench (@) into the shaft ((4_) of the hinge mid.
3) Please adjust the height difference
between the doors turning the hex wrench (@) clockwise ( _
)
or counter clockwise ( _._
).
Ji
i
i
(_=
When you turn countei clockwise (_),
the door goes upi
NOTE
4) After adjusting the doors, please insert enclosed fastener-ring (@) using a plier ((6})in the gap between
the hinge-grommet (@)and the hinge-mid (@).
The number of the fastener-ring to insert depends on the gap.
"----=
Four fastener-rings are enclosed with the refrigerator.
NOTE
22
Advertisement
