Advertisement
How to disassemble/assemble
the Arctic Select Zone Door
1) Open the Arctic Select Zone Door.
2) Take out the box in the Arctic Select
Zone Door.
i
\
3) Locate the eight phillips screws in the Arctic Select Zone. To lift the door up, unscrew the eight
phillips screws(d_) four turns. Do not remove the screws (dP)out.
(You don't need to unscrew the adjuster-phillips screw(@ )
4) Remove the door carefully from the rail lifting up
the door with both hands.
To allow screw(d_) heads to pass through the rail
holes.
5) Slide the rail carefully to the inside.
@
NOTE
when you assemble the Arctic Select zone Door, folloW the inStructionS above in reverse order.
27
Advertisement
