Advertisement
Reattaching the Freezer Door
1) Reattach a phillips screw (_) and two hex head
2) Place the hole in the bottom of the door (_4_)
screws (@)to the hinge,
over the hinge (@).
3) Insert the upper hinge shaft (®) intothe hole (_)). After levelling between the hinge brackets (®).
Reattach and close the latch (®) along the arrow.
Connect the water tube (@)and the wires (_). Then, place the water tube(@) on the hanger (@)
I
Be sure to insert the Water tube and push to the end.
NOTE
4) Put the connector (@) in the guide (@) of the
connector-cover and close it.
5) Put the front part of the upper hinge cover (@)
on the front part of the upper hinge (@) and
reattach it from the front of the upper hinge
cover first.
6) Reattach a phillips screw to the hinge cover (_).
29
Advertisement
