Label The Channels - ProScan PS36810 User Manual

SETTING UP
3. Press OK to select it and continue.
LABEL THE CHANNELS
This last step in the setup routine lets you create your channel list and
label your channels. If you skip this step now, you can access it later by
selecting Channel from the Main menu and selecting List and Labels.
1. From the setup screen, choose "Name channels."
2,
3.
4+
Use the left and right arrows to point to the three different areas of
the control panel (called "fields").
Use the up and down arrows to scroll through the numbers (or use
the digit keys on the remote) and letters and select Yesor No in the
Channel List field. You may wish to refer to the TV station call
letters listed in your newspaper's TV section for ideas on labelling
the channels.
Repeat this process for each of your channels. Then press MENU or
OK to continue. The monitor can store in memory as many as 45
labels.
Use the CH ^ (channel up) or CH v
(channel down) buttons to change
channels in the Channel Number field.
This works even if you're not in the
Channel Number field. Or, enter the
channel number directly using the
number buttons on the universal remote.
To enter a number greater than 99, press
and hold "1" to enter the hundreds digit,
release, then press the two remaining
numbers.
The List and Labels feature can also be
accessed from the Channel menu.
Because this procedure can be time
consuming, feel free to skip this step and
come back to it later.
24